The Overdrive Wall Mounted Single-Plate Loaded Dual Cable Tower brings proper cable training to your wall. You get two independently adjustable cable points and a full spread of pressing, pulling, rowing, curling and core work without handing over the floor space a full cable station demands. Everything runs off a single plate-loaded carriage. Load Olympic plates onto the 24 cm horn sleeves and get to work, up to 150 kg.

The pulley carriage travels through 33 positions on 50 x 50 mm steel uprights, taking the cables from a high 192 cm lat pull-down height down to low rows and everywhere in between. Each pulley swivels a full 270 degrees, so the cable follows your line of pull instead of fighting it. Train one side at a time at a 2:1 ratio for longer cable travel and smoother control on single-arm and functional movements or connect both cables for a 1:1 ratio when you want to move heavier loads.

*Wall anchoring required: to ensure the safety and stability of the unit, it must be securely anchored to the wall

Highlights:

• *Wall-mounted design - must be anchored to the wall
• *Dual independently adjustable cable pulleys
• *33 pulley height positions
• *270 degree swivel pulleys for maximum range of motion
• *2:1 cable ratio per cable; 1:1 when both cables are connected
• *150 kg weight capacity
• *Highest lat pull-down point at 192 cm
• *Fits Olympic plates only
• *2 adjustable straps included
• *Black powder-coated finish
• *Dual guide rods with linear bearings eliminate sticking points

Specifications:

• *Mounting: wall-mounted - anchoring to the wall is required
• *Dimensions: 222 cm (H) x 66 cm (D) x 64 cm (W)
• *Uprights: 50 x 50 mm
• *Depth with anchor bracket: 70 cm
• *Pulley positions: 33
• *Highest lat pull-down point: 192 cm
• *Cable ratio: 2:1 each side; 1:1 with both cables combined
• *Total weight: 35 kg
• *Weight capacity: 150 kg
• *Horn sleeves: 24 cm - fits Olympic plates only